-
-
HD Heating Welding Blowpipe for heavy duty Heating applications
Conform To : IS 7653-1975 & BSEN ISO 5172-1997
An Injector type Oxy-Acetylene, ESAB H.D. Heating Blowpipe, is used for localized heating. It is particularly useful for large construction sites, pipe bending, and other applications for general purpose heating. The standard blowpipe is about 750mm long and supplied with nozzle size 30. A large nozzle size 33 can be supplied as an optional extra. The blowpipe is designed to be used with Oxygen and dissolved Acetylene, preferably drawn from suitable manifold cylinders.
-
MODEL ‘O’ – Welding blowpipe for light duty welding applications
Conform To: IS 7653-1975 & BSEN ISO 5172-1997
ESAB Model “O” blowpipe is a finely balanced injector type blowpipe ideally suited for fine welding and brazing applications, including fusion welding and brazing applications. lt is used for fusion welding of the thin sheet up to 1.5 mm. (e.g. Zinc or Aluminium). It is also suitable for delicate lead welding. Careful design of tips neck and injector give trouble-free operation, high performance, economy, and safety. Model “O’ welding blowpipe is ideal for production lines where Its handiness minimizes operator fatigue. Model “O” blowpipe is available in different lengths for different types of operations.
-
-
-
SAFFIRE LWHP Welding Blowpipe for light duty welding applications
Conform To : IS 7653-1975 & BSEN ISO 5172-1997
ESAB Saffire Light Weight Welding Blowpipe has been developed for use in light sheet metal in garages and workshops. It is ideally suitable for repetitive work in production lines, where its handiness minimizes operator fatigue. Careful design of tips, mixer and shank gives trouble-free operation, high performance, economy and safety. The blowpipe is supplied with complete hose connection, operating data card and 4 nos. of swaged tips in sizes : 2, 3, 6 and 13. -
SAFFIRE 2HP Welding Blowpipe for medium duty Welding application
Conform To: IS 7653-1975 & BSEN ISO 5172-1997
An ideal blowpipe for welding various metals in general workshop use and general heating purpose. It is supplied with tips suitable for welding mild steel in the range of 1.25 mm. to 8.5mm thickness.
The blowpipe is supplied complete with hose connections, spanner, operating data card, and 6 nos. swaged tips-sizes : 2, 3, 6, 13, 20 and 30.
-
-
-
P-Type (LPG) Nozzle For Cutogen 5
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
-
A-Type (Acetylene) Nozzle for Cutogen 5
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
-
-
-
PNM (LPG) Nozzle for NM 250/ NM400
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
-
AGNM (Gouging) Nozzle for NM 400
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
-
-
-
SNM Acetylene Nozzle for NM 250 /NM 400
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
-
Single Stage Argon Flowmeter Regulator
This is a single-stage flowmeter regulator, which provides precise regulation and measurement of gas flow. This is well suited for a wide variety of industrial uses.
- Service Pressure: 200 bar
- Rated flow: 25 lit/min.
- Inlet connection : Thread EXT-5/8″ BSP RH.
- Outlet connection : Thread EXT-318″ BSP RH.
- Preset Type: Provides accurate control of gas pressure to the flowmeter.
- Imported safety pressure gauges designed for 250 bar pressure, confirming to ISO 5171 standards.
- Body: Chrome plated
-
-
-
Single Stage Oxygen Regulator
Conform To : IS 6901-2009
For extra high performance, this regulator is designed and engineered to a high standard of excellence. With the unique safety and sophistication, this regulator can meet service demands where high flow oxygen is required. These regulators are suitable for heavy cutting, thermic lancing, and light scarfing. Also, they are suitable for use with cylinders and pipelines.
Imported safety pressure gauges designed for 300 bar service pressure, confirming to ISO 5171′ standards.
-
Single Stage Regulator
Conform To: IS 6901-2009 & BSEN ISO 2503-1998
B’ Series single-stage regulators continue the tradition of superior performance in the single-stage range. The latest materials and advanced component design make these regulators suitable to meet the stringent demands of use in shop-floor as well as outdoor conditions with enhanced safety. ESAB 10X-13B and ESAB IDA-4B are the toughest and most reliable units for oxy-fuel gas service. These are provided with two pressure gauges one to indicate outlet pressure & the other to inlet pressure. Also available are ‘C’ series single-stage regulators with only one gauge to show the cylinder pressure. The working pressure calibrated on the bonnet can be set by the pressure adjusting knob. A low-pressure LPG regulator suitable for Oxy-LPG cutting, Air-LPG equipment, and healing applications is also available. The outlet adjustable pressure is 0-1 kg/cm2.
Imported Safety Pressure Gauges Designed For 300 bar services pressure , confirming to ISO 5171 standards.
-
-
-
FT Flashback Arrestor
The ESAB cylindrical flashback arrestors are of advanced design giving a higher flow rate. The FT model is designed to be connected to the torch, this model is equipped with a large cylindrical flame arresting element, and an automatic reset non-return valve.
Safety elements
- Gas non-return Valve: NV
- Flame Arrestor: FA
Safety device according to EN730-1,ISO5175,AS4603
Certification: BAM
-
ESAB Safety Shoe
Offers the comfort of a standard shoe and full protection according to S3. It is easy to ‘don’ and the foam laminated cambrelle lining makes it very comfortable to wear. The shoe is water and oil resistant and the seams are reinforced with ‘Satra’ standard nylon threads for maximum durability. The moulded PU sole offers a soft upper part with front ‘bumper’ and arch support, whilst the part in direct contact with the ground offers extremely high slip resistance. The shoe is equipped with a shock absorption system to prevent ankle spraining risks. Also, the sole is heat resistant up to 11 O·C.
-
-
-
Heavy Duty Low Power Consumption Welding Power Sources for MIG / MAG Welding
- Heavy-duty Low Power Consumption welding power sources for high quality manual or mechanized MIG/MAG welding output.
- Hex phase rectification gives almost ripple free welding output free from spatter.
- Stick-out control eliminates demand for operator’s skill.
- Fresh Tip Treatment (FTT) control eliminates formation of globules at the wire tip during weld stop condition.
- Fresh Arc Start (FAS) control instantaneously enhances the arc-striking rate for better arc striking.
- Self hold circuitry with crater control module.
- Pre-flow of shielding gas with burn-back control for optimum utilizations.
- An ideal choice for MIG/MAG welding application with enhanced productivity and quality.
-
AGNM (Gouging) Nozzle for NM 400
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
-
-
-
ORIGO Tech 9-13 Welding Helmet
The new stylish high Tech helmet design from ESAB. The new shell is available in striking high gloss colour, “Yellow”. The helmet Features the ESABcomfort headgear, whilst the lightweight shell offers superior face, head, ear & neck protection. which allows for welding in all positions. The ESAB variable shade ADF uses the latest technology and has proven reliability. The ADF is screw retained end sits In a fully moulded light seal cradle. which also creates a slight convex curve on the front spatter lens for extra security and strength. The Helmet Is delivered in an ESAB display Cox, fully assembled and ready to use.
-
CUTOGEN 5 CUTTING BLOWPIPE
CUTOGEN 5 is a well-balanced and rugged design Injector Mix hand cutting Torch. The Torch is suitable with Oxy/Acetylene or Oxy/LP Gas and cutting capacity up to 300mm. Standard version is 450mm/90°. Also available in different length and Head angle(180°).
Features
- Forged Brass Body and Angle Head for high strength and longer life
- Balanced gas flow to prevent the back flow
- Nylon Seat valve for smooth gas tightness
- Coloured control knob for easy to identify the gas line
- Uses A-type/Coolex/LPG nozzles
-
-
-
Welding Cables
- Harmonised Welding Cable with general purpose Rubber Sheathing as Type SE 1 NBR-PVC HOFR Sheathing as Type SE 3 to IS : 6380/84
- Conductor resistance in accordance to IS : 8130/84.
- Conductor resistance factor at +20°C – see technical catalogue
- Admissible working temperature at the conductor
General Purpose: + 80°C
HOFRlNBR-PVC Type: +100°C
-
-