Description
- Maximum Inlet Pressure 300 bar
- Maximum Outlet Pressure 14 bar
- Maximum Flow (Cylinder) 3500 LPM
- Maximum Flow (Pipeline) 2594 LPM at 14 bar
Single Stage Oxygen Regulator
Conform To : IS 6901-2009
For extra high performance, this regulator is designed and engineered to a high standard of excellence. With the unique safety and sophistication, this regulator can meet service demands where high flow oxygen is required. These regulators are suitable for heavy cutting, thermic lancing, and light scarfing. Also, they are suitable for use with cylinders and pipelines.
Imported safety pressure gauges designed for 300 bar service pressure, confirming to ISO 5171′ standards.
Related products
-
SAFFIRE 2HP Welding Blowpipe for medium duty Welding application
Conform To: IS 7653-1975 & BSEN ISO 5172-1997
An ideal blowpipe for welding various metals in general workshop use and general heating purpose. It is supplied with tips suitable for welding mild steel in the range of 1.25 mm. to 8.5mm thickness.
The blowpipe is supplied complete with hose connections, spanner, operating data card, and 6 nos. swaged tips-sizes : 2, 3, 6, 13, 20 and 30.
-
MODEL ‘O’ – Welding blowpipe for light duty welding applications
Conform To: IS 7653-1975 & BSEN ISO 5172-1997
ESAB Model “O” blowpipe is a finely balanced injector type blowpipe ideally suited for fine welding and brazing applications, including fusion welding and brazing applications. lt is used for fusion welding of the thin sheet up to 1.5 mm. (e.g. Zinc or Aluminium). It is also suitable for delicate lead welding. Careful design of tips neck and injector give trouble-free operation, high performance, economy, and safety. Model “O’ welding blowpipe is ideal for production lines where Its handiness minimizes operator fatigue. Model “O” blowpipe is available in different lengths for different types of operations.
-
FT Flashback Arrestor
The ESAB cylindrical flashback arrestors are of advanced design giving a higher flow rate. The FT model is designed to be connected to the torch, this model is equipped with a large cylindrical flame arresting element, and an automatic reset non-return valve.
Safety elements
- Gas non-return Valve: NV
- Flame Arrestor: FA
Safety device according to EN730-1,ISO5175,AS4603
Certification: BAM
-
PNM (LPG) Nozzle for NM 250/ NM400
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
Reviews
There are no reviews yet.