Description
| Metal thickness | Head Size | Oxygen pressure (PSI) |
|---|---|---|
| Over 1×1/2 Inch | 30 | 75-80 |
| Over 1×1/2 Inch | 33 | 100-110 |
Inlet Connections
3/8″ BSP RH for Oxygen & 3/8″ BSP LH Acetylene
HD Heating Welding Blowpipe for heavy duty Heating applications
Conform To : IS 7653-1975 & BSEN ISO 5172-1997
An Injector type Oxy-Acetylene, ESAB H.D. Heating Blowpipe, is used for localized heating. It is particularly useful for large construction sites, pipe bending, and other applications for general purpose heating. The standard blowpipe is about 750mm long and supplied with nozzle size 30. A large nozzle size 33 can be supplied as an optional extra. The blowpipe is designed to be used with Oxygen and dissolved Acetylene, preferably drawn from suitable manifold cylinders.
Related products
-
PNM (LPG) Nozzle for NM 250/ NM400
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
-
DURA HOSE
ESAB Dura Hoses are specially designed gas hoses for welding and oxy-fuel gas cutting with gas specific colour coding. The hoses are designed with a core of Black Synthetic Elastomer, Re-inforcement of High Tensile Polyester Yarn and Cover of Hiper Retardant Thermocompound
-
NM 250 CUTTING BLOWPIPE
NM 250 is a well-balanced Nozzle Mix hand cutting Torch. The Torch gives more Safety and Efficiency than Injector Mix. Light weight NM cutters are easy to handle and can withstand rough usage for long time. The Torch is suitable with Oxy/Acetylene or Oxy/LP Gas and cutting capacity up to 300 mm.
-
SNM Acetylene Nozzle for NM 250 /NM 400
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
Reviews
There are no reviews yet.