GAS EQUIPMENT
-
A-Type (Acetylene) Nozzle for Cutogen 5
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
-
AGNM (Gouging) Nozzle for NM 400
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
-
CUTOGEN 5 CUTTING BLOWPIPE
CUTOGEN 5 is a well-balanced and rugged design Injector Mix hand cutting Torch. The Torch is suitable with Oxy/Acetylene or Oxy/LP Gas and cutting capacity up to 300mm. Standard version is 450mm/90°. Also available in different length and Head angle(180°).
Features
- Forged Brass Body and Angle Head for high strength and longer life
- Balanced gas flow to prevent the back flow
- Nylon Seat valve for smooth gas tightness
- Coloured control knob for easy to identify the gas line
- Uses A-type/Coolex/LPG nozzles
-
DURA HOSE
ESAB Dura Hoses are specially designed gas hoses for welding and oxy-fuel gas cutting with gas specific colour coding. The hoses are designed with a core of Black Synthetic Elastomer, Re-inforcement of High Tensile Polyester Yarn and Cover of Hiper Retardant Thermocompound
-
DURA MULTI STAGE REGULATOR
DURA Multi stage regulator gives a constant delivery flow over a range of decreasing inlet pressures. This precise two stage regulation provides superior operating characteristics for applications where change in delivery pressure would affect performance characteristics of work or test results.
-
Flashback Arrestors Model FRT
For connecting to a pressure regulator or an outlet point.
The ESAB cylindrical flashback arrestors are of advanced design giving a higher flow rate. The FRT model is designed to be connected to the regulator or outlet point. The model is equipped with a large cylindrical flame arresting element, an automatic reset non-return valve and a heat sensitive thermal cut-off.
-
FT Flashback Arrestor
The ESAB cylindrical flashback arrestors are of advanced design giving a higher flow rate. The FT model is designed to be connected to the torch, this model is equipped with a large cylindrical flame arresting element, and an automatic reset non-return valve.
Safety elements
- Gas non-return Valve: NV
- Flame Arrestor: FA
Safety device according to EN730-1,ISO5175,AS4603
Certification: BAM
-
HD Heating Welding Blowpipe for heavy duty Heating applications
Conform To : IS 7653-1975 & BSEN ISO 5172-1997
An Injector type Oxy-Acetylene, ESAB H.D. Heating Blowpipe, is used for localized heating. It is particularly useful for large construction sites, pipe bending, and other applications for general purpose heating. The standard blowpipe is about 750mm long and supplied with nozzle size 30. A large nozzle size 33 can be supplied as an optional extra. The blowpipe is designed to be used with Oxygen and dissolved Acetylene, preferably drawn from suitable manifold cylinders.
-
MODEL ‘O’ – Welding blowpipe for light duty welding applications
Conform To: IS 7653-1975 & BSEN ISO 5172-1997
ESAB Model “O” blowpipe is a finely balanced injector type blowpipe ideally suited for fine welding and brazing applications, including fusion welding and brazing applications. lt is used for fusion welding of the thin sheet up to 1.5 mm. (e.g. Zinc or Aluminium). It is also suitable for delicate lead welding. Careful design of tips neck and injector give trouble-free operation, high performance, economy, and safety. Model “O’ welding blowpipe is ideal for production lines where Its handiness minimizes operator fatigue. Model “O” blowpipe is available in different lengths for different types of operations.
-
NM 250 CUTTING BLOWPIPE
NM 250 is a well-balanced Nozzle Mix hand cutting Torch. The Torch gives more Safety and Efficiency than Injector Mix. Light weight NM cutters are easy to handle and can withstand rough usage for long time. The Torch is suitable with Oxy/Acetylene or Oxy/LP Gas and cutting capacity up to 300 mm.
-
P-Type (LPG) Nozzle For Cutogen 5
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
-
PNM (LPG) Nozzle for NM 250/ NM400
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance