Welding Equipment

  • Heavy Duty Low Power Consumption Welding Power Sources for MIG / MAG Welding

    0 out of 5
    • Heavy-duty Low Power Consumption welding power sources for high quality manual or mechanized MIG/MAG welding output.
    • Hex phase rectification gives almost ripple free welding output free from spatter.
    • Stick-out control eliminates demand for operator’s skill.
    • Fresh Tip Treatment (FTT) control eliminates formation of globules at the wire tip during weld stop condition.
    • Fresh Arc Start (FAS) control instantaneously enhances the arc-striking rate for better arc striking.
    • Self hold circuitry with crater control module.
    • Pre-flow of shielding gas with burn-back control for optimum utilizations.
    • An ideal choice for MIG/MAG welding application with enhanced productivity and quality.
  • Heavy Duty Single Phase MMA Inverter

    0 out of 5

    Arc 250i is a single phase inverter welding power source designed for light and heavy duty applications for continuous electrode usage.

  • Holder Confort 600

    0 out of 5

    An open head style type ‘B’ electrode holder with a fully insulated head to resist spatter and sturdy handle, made of fiberglass polyamide 66 – 33 for heavy-duty application. Insulation resistant above 1 MO & Dielectric strength up to 3000 volts. This holder is suitable for cables up to AI 120 sq. mm.lCu 70 sq. mm. and CE certified as per European standard EN 60974-11.

  • Holder Handy 400

    0 out of 5

    A screw style ‘A’ type electrode holder with a fully insulated head and handle for medium-duty application. The handle is made of synthetic rubber for a comfortable grip and tip insulator is made of DMC to resist weld spatter. Insulation resistant above 1 MO & Dielectric strength up to 3000 volts. This holder is CE certified as per European standard EN 60974-11.

  • Holder Handycool HC 600

    0 out of 5

    This is a crocodile style type ‘B’ electrode holder, which is made from black phenolic resin insulated jaws and a black DMC handle. This holder is fUlly insulated for extra safety and brass jaws ensure good contact. It is suitable for cables up to AI 120 sq. mm.lCu 70 sq. mm. and is used in heavy-duty welding applications.

  • Magnetic Earth Clamp 600

    0 out of 5

    Magnetic earth clamp with strong gripping power that permits attachment to any ferrous object. These clamps provide a large contact area with less overheating – thanks to fewer junctions. Flat edges ensure perfect grip on the job and a strong handle to pull it out easily. Magnetic earth clamp is very convenient to place anywhere and start welding instantly.

  • MIG 400i / 500i Rugged & Reliable Inverters

    0 out of 5

    Robust and Powerful
    Buddy™ MIG 400i / 500i are heavy duty IGBT based inverter controlled power sources for MIG / MAG welding. The power sources are built to withstand rugged use, which makes it a perfect solution for industrial usage. It is ideal for heavy industries using solid and flux-cored wires.

  • MODEL ‘O’ – Welding blowpipe for light duty welding applications

    0 out of 5

    Conform To: IS 7653-1975 & BSEN ISO 5172-1997

    ESAB Model “O” blowpipe is a finely balanced injector type blowpipe ideally suited for fine welding and brazing applications, including fusion welding and brazing applications. lt is used for fusion welding of the thin sheet up to 1.5 mm. (e.g. Zinc or Aluminium). It is also suitable for delicate lead welding. Careful design of tips neck and injector give trouble-free operation, high performance, economy, and safety. Model “O’ welding blowpipe is ideal for production lines where Its handiness minimizes operator fatigue. Model “O” blowpipe is available in different lengths for different types of operations.

  • NM 250 CUTTING BLOWPIPE

    0 out of 5

    NM 250 is a well-balanced Nozzle Mix hand cutting Torch. The Torch gives more Safety and Efficiency than Injector Mix. Light weight NM cutters are easy to handle and can withstand rough usage for long time. The Torch is suitable with Oxy/Acetylene or Oxy/LP Gas and cutting capacity up to 300 mm.

     

  • ORIGO Tech 9-13 Welding Helmet

    0 out of 5

    The new stylish high Tech helmet design from ESAB. The new shell is available in striking high gloss colour,  “Yellow”. The helmet Features the ESABcomfort headgear, whilst the lightweight shell offers superior face, head, ear &  neck protection. which allows for welding in all positions. The ESAB variable shade ADF uses the latest technology and has proven reliability. The ADF is  screw retained end sits In a fully moulded light seal cradle. which also creates a slight convex curve on the front spatter lens for extra security and strength. The Helmet Is delivered in an ESAB display Cox, fully assembled and ready to use.

  • P-Type (LPG) Nozzle For Cutogen 5

    0 out of 5

    Hard drawn Tellurium copper used in one-piece nozzles

    • withstands heat & wear
    • out lasts any copper nozzles

    One piece nozzle has swaged interior

    • Gas passages are mirror smooth with internal angles rounded
    • Non-turbulent more efficient gas flow.
    • Clean smooth cuts with minimal kerf loss

    Preheat ports are closely spaced around cutting orifice

    • For greater concentration of preheat flames.

    Long parallel preheat passages

    • Permit redressing of the nozzle without affecting performance
  • PNM (LPG) Nozzle for NM 250/ NM400

    0 out of 5

    Hard drawn Tellurium copper used in one-piece nozzles

    • withstands heat & wear
    • out lasts any copper nozzles

    One piece nozzle has swaged interior

    • Gas passages are mirror smooth with internal angles rounded
    • Non-turbulent more efficient gas flow.
    • Clean smooth cuts with minimal kerf loss

    Preheat ports are closely spaced around cutting orifice

    • For greater concentration of preheat flames.

    Long parallel preheat passages

    • Permit redressing of the nozzle without affecting performance