Description
| NOZZLE SIZE | PLATE THICKNESS (mm) |
|---|---|
| A8(1/32″) | 6 |
| A12(3/64z”) | 50,75,100 |
| A20(5/64″) | 150 |
| A20(5/64″) | 150 |
| A24(3/32″) | 200 |
| A28(7/64″) | 250 |
| A32(1/8″) | 300 |
A-Type (Acetylene) Nozzle for Cutogen 5
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
Related products
-
Flashback Arrestors Model FRT
For connecting to a pressure regulator or an outlet point.
The ESAB cylindrical flashback arrestors are of advanced design giving a higher flow rate. The FRT model is designed to be connected to the regulator or outlet point. The model is equipped with a large cylindrical flame arresting element, an automatic reset non-return valve and a heat sensitive thermal cut-off.
-
TRANSWELD 400
Welding Transformer for Shop and Site Application
- Natural air cooled for increased safety of the transformer.
- Horizontal shunt core design ensures longer operational life of the shunt-core moving mechanism.
- Well-spaced coils for adequate airflow to the transformer ensures longer service life.
- Robust and compact construction to withstand rough handling at sites.
- Ideal for TIG welding with optional TIG attachments.
-
Single Stage Regulator
Conform To: IS 6901-2009 & BSEN ISO 2503-1998
B’ Series single-stage regulators continue the tradition of superior performance in the single-stage range. The latest materials and advanced component design make these regulators suitable to meet the stringent demands of use in shop-floor as well as outdoor conditions with enhanced safety. ESAB 10X-13B and ESAB IDA-4B are the toughest and most reliable units for oxy-fuel gas service. These are provided with two pressure gauges one to indicate outlet pressure & the other to inlet pressure. Also available are ‘C’ series single-stage regulators with only one gauge to show the cylinder pressure. The working pressure calibrated on the bonnet can be set by the pressure adjusting knob. A low-pressure LPG regulator suitable for Oxy-LPG cutting, Air-LPG equipment, and healing applications is also available. The outlet adjustable pressure is 0-1 kg/cm2.
Imported Safety Pressure Gauges Designed For 300 bar services pressure , confirming to ISO 5171 standards.
-
NM 250 CUTTING BLOWPIPE
NM 250 is a well-balanced Nozzle Mix hand cutting Torch. The Torch gives more Safety and Efficiency than Injector Mix. Light weight NM cutters are easy to handle and can withstand rough usage for long time. The Torch is suitable with Oxy/Acetylene or Oxy/LP Gas and cutting capacity up to 300 mm.
Reviews
There are no reviews yet.