Description
| NOZZLE width (mm) | Maximum Groove Width (mm) |
|---|---|
| 13 | 8 |
| 19 | 11 |
| 25 | 12 |
AGNM (Gouging) Nozzle for NM 400
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
Related products
-
DURA MULTI STAGE REGULATOR
DURA Multi stage regulator gives a constant delivery flow over a range of decreasing inlet pressures. This precise two stage regulation provides superior operating characteristics for applications where change in delivery pressure would affect performance characteristics of work or test results.
-
MODEL ‘O’ – Welding blowpipe for light duty welding applications
Conform To: IS 7653-1975 & BSEN ISO 5172-1997
ESAB Model “O” blowpipe is a finely balanced injector type blowpipe ideally suited for fine welding and brazing applications, including fusion welding and brazing applications. lt is used for fusion welding of the thin sheet up to 1.5 mm. (e.g. Zinc or Aluminium). It is also suitable for delicate lead welding. Careful design of tips neck and injector give trouble-free operation, high performance, economy, and safety. Model “O’ welding blowpipe is ideal for production lines where Its handiness minimizes operator fatigue. Model “O” blowpipe is available in different lengths for different types of operations.
-
DURA HOSE
ESAB Dura Hoses are specially designed gas hoses for welding and oxy-fuel gas cutting with gas specific colour coding. The hoses are designed with a core of Black Synthetic Elastomer, Re-inforcement of High Tensile Polyester Yarn and Cover of Hiper Retardant Thermocompound
-
Flashback Arrestors Model FRT
For connecting to a pressure regulator or an outlet point.
The ESAB cylindrical flashback arrestors are of advanced design giving a higher flow rate. The FRT model is designed to be connected to the regulator or outlet point. The model is equipped with a large cylindrical flame arresting element, an automatic reset non-return valve and a heat sensitive thermal cut-off.
Reviews
There are no reviews yet.