Description
Features
- High Flexibility with Kink & Crush resistance
- Excellent Electrical Resistance
- Good Abrasion Resistance
- Light weight
- Standard 50m length in re-cyclable cardboard boxes
DURA HOSE
ESAB Dura Hoses are specially designed gas hoses for welding and oxy-fuel gas cutting with gas specific colour coding. The hoses are designed with a core of Black Synthetic Elastomer, Re-inforcement of High Tensile Polyester Yarn and Cover of Hiper Retardant Thermocompound
Related products
-
PUG NM CUTTING MACHINES
PUG NM cutting machine used for straight line as well as circle cutting also.It moves on its own track for straight line cutting and performs circle cutting with the help of circle cutting attachment.This machine is compatible with Nozzle Mix torch.
-
SAFFIRE LWHP Welding Blowpipe for light duty welding applications
Conform To : IS 7653-1975 & BSEN ISO 5172-1997
ESAB Saffire Light Weight Welding Blowpipe has been developed for use in light sheet metal in garages and workshops. It is ideally suitable for repetitive work in production lines, where its handiness minimizes operator fatigue. Careful design of tips, mixer and shank gives trouble-free operation, high performance, economy and safety. The blowpipe is supplied with complete hose connection, operating data card and 4 nos. of swaged tips in sizes : 2, 3, 6 and 13. -
Single Stage Regulator
Conform To: IS 6901-2009 & BSEN ISO 2503-1998
B’ Series single-stage regulators continue the tradition of superior performance in the single-stage range. The latest materials and advanced component design make these regulators suitable to meet the stringent demands of use in shop-floor as well as outdoor conditions with enhanced safety. ESAB 10X-13B and ESAB IDA-4B are the toughest and most reliable units for oxy-fuel gas service. These are provided with two pressure gauges one to indicate outlet pressure & the other to inlet pressure. Also available are ‘C’ series single-stage regulators with only one gauge to show the cylinder pressure. The working pressure calibrated on the bonnet can be set by the pressure adjusting knob. A low-pressure LPG regulator suitable for Oxy-LPG cutting, Air-LPG equipment, and healing applications is also available. The outlet adjustable pressure is 0-1 kg/cm2.
Imported Safety Pressure Gauges Designed For 300 bar services pressure , confirming to ISO 5171 standards.
-
SNM Acetylene Nozzle for NM 250 /NM 400
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
Reviews
There are no reviews yet.