Conform To: IS 7653-1975 & BSEN ISO 5172-1997
ESAB Model “O” blowpipe is a finely balanced injector type blowpipe ideally suited for fine welding and brazing applications, including fusion welding and brazing applications. lt is used for fusion welding of the thin sheet up to 1.5 mm. (e.g. Zinc or Aluminium). It is also suitable for delicate lead welding. Careful design of tips neck and injector give trouble-free operation, high performance, economy, and safety. Model “O’ welding blowpipe is ideal for production lines where Its handiness minimizes operator fatigue. Model “O” blowpipe is available in different lengths for different types of operations.
| Capacity | Thin Sheet metal upto 1.5mm |
|---|---|
| Inlet | Oxygen 1/4″ B.S.P.RH & Acetylene 1/4″ B.S.P.LH |
| Weight | 250 gms |
| Length | 20 cm(Without tip) |
| Hose | 5mm bore hose (Blue-Oxygen & Red-Acetylene) |
Design/Construction
Conform To : IS 6901-2009
For extra high performance, this regulator is designed and engineered to a high standard of excellence. With the unique safety and sophistication, this regulator can meet service demands where high flow oxygen is required. These regulators are suitable for heavy cutting, thermic lancing, and light scarfing. Also, they are suitable for use with cylinders and pipelines.
Imported safety pressure gauges designed for 300 bar service pressure, confirming to ISO 5171′ standards.
Conform To: IS 6901-2009 & BSEN ISO 2503-1998
B’ Series single-stage regulators continue the tradition of superior performance in the single-stage range. The latest materials and advanced component design make these regulators suitable to meet the stringent demands of use in shop-floor as well as outdoor conditions with enhanced safety. ESAB 10X-13B and ESAB IDA-4B are the toughest and most reliable units for oxy-fuel gas service. These are provided with two pressure gauges one to indicate outlet pressure & the other to inlet pressure. Also available are ‘C’ series single-stage regulators with only one gauge to show the cylinder pressure. The working pressure calibrated on the bonnet can be set by the pressure adjusting knob. A low-pressure LPG regulator suitable for Oxy-LPG cutting, Air-LPG equipment, and healing applications is also available. The outlet adjustable pressure is 0-1 kg/cm2.
Imported Safety Pressure Gauges Designed For 300 bar services pressure , confirming to ISO 5171 standards.
Hard drawn Tellurium copper used in one-piece nozzles
One piece nozzle has swaged interior
Preheat ports are closely spaced around cutting orifice
Long parallel preheat passages
Hard drawn Tellurium copper used in one-piece nozzles
One piece nozzle has swaged interior
Preheat ports are closely spaced around cutting orifice
Long parallel preheat passages
Reviews
There are no reviews yet.