Description
| NOZZLE SIZE | PLATE THICKNESS (mm) |
|---|---|
| P8(1/32″) | 6 |
| P12(3/64″) | 12 |
| P16(1/16″) | 25,50,75 |
| P20(5/64″) | 100 |
| P24(3/32″) | 150 |
| P28(7/64″) | 200 |
| P32(1/8″) | 250 |
P-Type (LPG) Nozzle For Cutogen 5
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
Related products
-
HD Heating Welding Blowpipe for heavy duty Heating applications
Conform To : IS 7653-1975 & BSEN ISO 5172-1997
An Injector type Oxy-Acetylene, ESAB H.D. Heating Blowpipe, is used for localized heating. It is particularly useful for large construction sites, pipe bending, and other applications for general purpose heating. The standard blowpipe is about 750mm long and supplied with nozzle size 30. A large nozzle size 33 can be supplied as an optional extra. The blowpipe is designed to be used with Oxygen and dissolved Acetylene, preferably drawn from suitable manifold cylinders.
-
PNM (LPG) Nozzle for NM 250/ NM400
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
-
DURA MULTI STAGE REGULATOR
DURA Multi stage regulator gives a constant delivery flow over a range of decreasing inlet pressures. This precise two stage regulation provides superior operating characteristics for applications where change in delivery pressure would affect performance characteristics of work or test results.
-
SAFFIRE 2HP Welding Blowpipe for medium duty Welding application
Conform To: IS 7653-1975 & BSEN ISO 5172-1997
An ideal blowpipe for welding various metals in general workshop use and general heating purpose. It is supplied with tips suitable for welding mild steel in the range of 1.25 mm. to 8.5mm thickness.
The blowpipe is supplied complete with hose connections, spanner, operating data card, and 6 nos. swaged tips-sizes : 2, 3, 6, 13, 20 and 30.
Reviews
There are no reviews yet.