Description
Features
- Cutting Capacity upto 100mm.
- Bevel Cut upto 45°
- Circle cutting- Ø 75-1140mm
- Convinent in handling
- The Torch is suitable with Oxy and Acetylene/LP Gas
PUG NM CUTTING MACHINES
PUG NM cutting machine used for straight line as well as circle cutting also.It moves on its own track for straight line cutting and performs circle cutting with the help of circle cutting attachment.This machine is compatible with Nozzle Mix torch.
Related products
-
SAFFIRE 2HP Welding Blowpipe for medium duty Welding application
Conform To: IS 7653-1975 & BSEN ISO 5172-1997
An ideal blowpipe for welding various metals in general workshop use and general heating purpose. It is supplied with tips suitable for welding mild steel in the range of 1.25 mm. to 8.5mm thickness.
The blowpipe is supplied complete with hose connections, spanner, operating data card, and 6 nos. swaged tips-sizes : 2, 3, 6, 13, 20 and 30.
-
Single Stage Regulator
Conform To: IS 6901-2009 & BSEN ISO 2503-1998
B’ Series single-stage regulators continue the tradition of superior performance in the single-stage range. The latest materials and advanced component design make these regulators suitable to meet the stringent demands of use in shop-floor as well as outdoor conditions with enhanced safety. ESAB 10X-13B and ESAB IDA-4B are the toughest and most reliable units for oxy-fuel gas service. These are provided with two pressure gauges one to indicate outlet pressure & the other to inlet pressure. Also available are ‘C’ series single-stage regulators with only one gauge to show the cylinder pressure. The working pressure calibrated on the bonnet can be set by the pressure adjusting knob. A low-pressure LPG regulator suitable for Oxy-LPG cutting, Air-LPG equipment, and healing applications is also available. The outlet adjustable pressure is 0-1 kg/cm2.
Imported Safety Pressure Gauges Designed For 300 bar services pressure , confirming to ISO 5171 standards.
-
P-Type (LPG) Nozzle For Cutogen 5
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
-
A-Type (Acetylene) Nozzle for Cutogen 5
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
Reviews
There are no reviews yet.