Description
| NOZZLE (Inch) | PLATE THICKNESS (mm) |
|---|---|
| 1/32 | 6 |
| 3/64 | 12 |
| 1/16 | 25,50,75 |
| 5/64 | 100 |
| 3/32 | 150 |
| 1/8 | 200,250,300 |
SNM Acetylene Nozzle for NM 250 /NM 400
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
Related products
-
SAFFIRE LWHP Welding Blowpipe for light duty welding applications
Conform To : IS 7653-1975 & BSEN ISO 5172-1997
ESAB Saffire Light Weight Welding Blowpipe has been developed for use in light sheet metal in garages and workshops. It is ideally suitable for repetitive work in production lines, where its handiness minimizes operator fatigue. Careful design of tips, mixer and shank gives trouble-free operation, high performance, economy and safety. The blowpipe is supplied with complete hose connection, operating data card and 4 nos. of swaged tips in sizes : 2, 3, 6 and 13. -
MODEL ‘O’ – Welding blowpipe for light duty welding applications
Conform To: IS 7653-1975 & BSEN ISO 5172-1997
ESAB Model “O” blowpipe is a finely balanced injector type blowpipe ideally suited for fine welding and brazing applications, including fusion welding and brazing applications. lt is used for fusion welding of the thin sheet up to 1.5 mm. (e.g. Zinc or Aluminium). It is also suitable for delicate lead welding. Careful design of tips neck and injector give trouble-free operation, high performance, economy, and safety. Model “O’ welding blowpipe is ideal for production lines where Its handiness minimizes operator fatigue. Model “O” blowpipe is available in different lengths for different types of operations.
-
FT Flashback Arrestor
The ESAB cylindrical flashback arrestors are of advanced design giving a higher flow rate. The FT model is designed to be connected to the torch, this model is equipped with a large cylindrical flame arresting element, and an automatic reset non-return valve.
Safety elements
- Gas non-return Valve: NV
- Flame Arrestor: FA
Safety device according to EN730-1,ISO5175,AS4603
Certification: BAM
-
Power Compact 255
Compact MIG / MAG Welding Package
- Compact MIG/MAG packages with enclosed wire feeder.
- Spot, stitch and continuous welding operations.
- Adjustable burn back control
- Ideal for thin sheet fabrication and automotive industry.
Reviews
There are no reviews yet.