ESAB

  • ESAB Eco Safety Spectacles

    0 out of 5

    These stylish spectacles are used for drilling, chipping and metalworking, they have a sporty style and are extremely lightweight. Available in two different lens configurations. All lens configurations provide protection against dangerous UV radiation. CE approved according to EN 166-F.

  • ESAB Face Shield

    0 out of 5

    The safety face shield is made of 1.8 mm thick, 6″ long & 14″ wide, colorless, transparent acrylic. This tilting visor is to protect forehead, eyes, cheeks, nose and mouth from flying particles, sprays or splashes ofhazardous liquids.

  • ESAB Safety Shoe

    0 out of 5

    Offers the comfort of a standard shoe and full protection according to S3. It is easy to ‘don’ and the foam laminated cambrelle lining makes it very comfortable to wear. The shoe is water and oil resistant and the seams are reinforced with ‘Satra’ standard nylon threads for maximum durability. The moulded PU sole offers a soft upper part with front ‘bumper’ and arch support, whilst the part in direct contact with the ground offers extremely high slip resistance. The shoe is equipped with a shock absorption system to prevent ankle spraining risks. Also, the sole is heat resistant up to 11 O·C.

  • ESAB Welding Goggle

    0 out of 5

    New snugfit PVC make one piece Bocal type protective goggle with ventilators, holding rings with clear lense for gas welding, brazing, and gas cutting.

  • ESAB Xpert 7018 & 7018-1

    0 out of 5

    ESAB Xpert 7018 & ESAB Xpert 7018-1 are basic coated, hydrogen-controlled iron powder electrodes designed for welding in all positions. These electrodes provide excellent welding performance with stable arc, good arc striking & restriking properties and deposits radiographic quality welds. ESAB Xpert 7018-1 delivers good CVN impact toughness up to -46ºC.

    ESAB Xpert 7018 : AWS A5.1 E7018
    ESAB Xpert 7018-1 : AWS A5.1 E7018-1
    Welding Current : DC+, AC 70V

  • Filtair Disposable Masks

    0 out of 5

    The ESAB Filtair series has been developed to improve the comfort of disposable respirators whilst maintaining an excellent face fit. Colour coding the the range makes identification simple when varying levels of protection may be required. The mesh shell supports the filter media and prevents collapse onto the face and the preformed nose bridge provides a comfortable fit eliminating constant adjustment. The filters use the latest filter technology to promote low breathing resistance and are approved to EN149:2001(meeting the 120mg load testing). The Filtair is available as a pre-moulded and flat version. Depending on the protection level needed and the breathing resistance some models are equipped with a valve. All the masks are fitted with buckle fastening which also allows the wearer to adjust the straps accordingly

  • Flashback Arrestors Model FRT

    0 out of 5

    For connecting to a pressure regulator or an outlet point.

    The ESAB cylindrical flashback arrestors are of advanced design giving a higher flow rate. The FRT model is designed to be connected to the regulator or outlet point. The model is equipped with a large cylindrical flame arresting element, an automatic reset non-return valve and a heat sensitive thermal cut-off.

  • FT Flashback Arrestor

    0 out of 5

    The ESAB cylindrical flashback arrestors are of advanced design giving a higher flow rate. The FT model is designed to be connected to the torch, this model is equipped with a large cylindrical flame arresting element, and an automatic reset non-return valve.

    Safety elements

    • Gas non-return Valve: NV
    • Flame Arrestor: FA

    Safety device according to EN730-1,ISO5175,AS4603

    Certification: BAM

  • Hand Shield Armour

    0 out of 5

    Flat fronted, flame retardant hand shield made from glass-filled nylon having 1.8 mm shell thickness, weighing only 480 gms. This hand shield has a concealed handle with a good thumb grip facility to protect the hand. Lens aperture 83x 108mm (4Y4″x3Y4 “).

  • HD Heating Welding Blowpipe for heavy duty Heating applications

    0 out of 5

    Conform To : IS 7653-1975 & BSEN ISO 5172-1997

    An Injector type Oxy-Acetylene, ESAB H.D. Heating Blowpipe, is used for localized heating. It is particularly useful for large construction sites, pipe bending, and other applications for general purpose heating. The standard blowpipe is about 750mm long and supplied with nozzle size 30. A large nozzle size 33 can be supplied as an optional extra. The blowpipe is designed to be used with Oxygen and dissolved Acetylene, preferably drawn from suitable manifold cylinders.

  • Heavy Duty Earth Clamp 600

    0 out of 5

    An earth clamp made of zinc-coated steel with copper plated jaws and suitable copper mesh that provides good contact with the workpiece. Jaw opening is up to 60mm. and is suitable for heavy-duty applications.

  • Heavy Duty Hand Gloves

    0 out of 5

    A hard-wearing work glove made of cow grain leather with a cotton lining for comfort. This Glove is used for general working purposes.